OEMiC WELLHEAD

Our Tubing Head and Casing Head are very competitive in this market. Contact us : (604)-448-8308

We Make for You!

Dimensions Download Click Tubing Head 2000# 9”x7-1/16” - Height 14” 2000# 9”x7-1/16” - Height 16-1/4” 2000# 9”x7-1/16” – Height 24” 2000# 11”x7-1/16” – Height 16-1/4” 2000# 11”x7-1/16” – Height 24” 2000# 11”x7-1/16” – Height 27” Casing Head 5000# Forging 11” 2000# Forging 9”

Casing Head

	House of casing head is made of low alloy steel meeting API 6A requirement.
	Casing head is an important equipment to control wellhead pressure during drilling operation.
	Side outlet have VR thread.

Casing Head - Threaded Bottom Connection

	Thread of bottom can be API round thread or buttress thread.
	Casing head with threaded bottom are easily installed on surface casing
	House of casing head is made of low alloy steel meeting API 6A requirement . (For example,AISI 4130)

Casing Head- Welded Bottom Connection

	Position that be welded on can be tested by pumping grease to working pressure with plastic injection gun.
	The material of casing head with "SOW" bottom has good quality to be welded

Casing Head -Slip Bottom Connection

	Decrease labor force and qualification requirement for the operational personnel.
	Casing head with slip bottom can be installed conveniently . Installation process will not be affect by climate or environment as welded bottom type casing head
	Fast in installation ,usually 30 to 50 minute sufficient ,improve efficient for almost ten times ,and will greatly reduce the drilling time .

The Factory is ISO-9001 and API-6A certified.

Other Wellhead Equipment