OEMic

Wafer Check Valve

How To Order

8”

150

(A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

(J)

Example:

8 “- 044-0CCC-150W0

8 Inches, Check Valve Series Dual Plate Wafer Type, WCB body, 13Cr plate, 13Cr seat facing, 13Cr, 13Cr Stern material, ANSI 150#, Wafer connection, No operator.

Figure Number System

Size (A)	Series (B)	Structure Type (C)	*Body Material (D)	Plate Material* (E)	Seat Material (F)*	Shaft Material* (G)	Pressure Rating (H)	End Connection (I)	Type Operation (J)
Use	04-Check	1-swing type	0-WCB	0-WCB	0-WCB	0-WCB	150 (lb)	W-Wafer	0-None
Inch for		2-ball type	1-316 SS	1-316 SS	1-316 SS	1-316 SS	300 (lb)	FF-Flat Face Flanged	7-Pnumatic
size unit		3-piston type	2-Cast Iron	2-Cast Iron	2-Cast Iron	2-Cast Iron	600 (lb)	RF-Raise Face Flanged	9-Manual
		4-Dual plate Wafer type	6-LCB	6-LCB	6-LCB	6-LCB	900 (lb)	RTJ-Ring Joint Flanged
		5-Axial type	C-13Cr	C-13Cr	C-13Cr	C-13Cr	10 (PN)	BW-Butt Weld
		6-Flexible	D-304SS	D-304SS	D-304SS	D-304SS	16 (PN)	SW-Socket Weld
		7-Stop Check	E-304SSL	E-304SSL	E-304SSL	E-304SSL	25 (PN)	S-Screwed End
		8-Tilt Check	F-316SSL	F-316SSL	F-316SSL	F-316SSL	40 (PN)
		9-Other

* - Refer material code for more material selection.

Material Code

0 - WCB	C- 13Cr	j -	T -
1 - 316SS	D - 304SS	K-	t - Teflon
2 - Cast Iron	d -	L -	U -
3 - Ductile Iron	E - 304SSL	l -	V -
4 - PVC	e - EPDM	M -	W -
5 - A105	F - 316SSL	N -	X -
6 - LCB	f -	n – Black Neoprene	Y -
7 - Brass	G - LCC	O -	y -
8 - Bronze	g-	P -	Z -
9 - Special	H - Inconel	Q -
A - 416SS	h -	q -	“+” = STL
a - Viton	I - WC6	R -	“-“ = Plated with Nichol or Chrome
B - Monel	i -	r -
b – Buna-N	J - Duplex	S -

Sign after the material = the extra coating on the specific material.
Ex. 1+ = 316SS with Stellite coating, 6- Nichol = LCB with Nichol plated.